EVX EMS Remote Monitoring Setup
This guide covers the EMS gateway, communication parameters and remote platform connection.

Before you start
- Confirm site network, static IP or 4G router.
- Prepare serial number, points list and platform account.
- Confirm Modbus TCP/RTU parameters and meter address.
Connection steps
- Connect the EMS gateway to the switch or 4G router.
- Configure platform address, port and serial number.
- Verify telemetry, status and alarm points.
- Confirm online status and history in the platform.
Troubleshooting
| Symptom | Check |
|---|---|
| Gateway offline | Power, network and platform address |
| Data not updating | Points list, slave address and polling interval |
| Alarms missing | Alarm mapping and platform permissions |